VideoPhoto

Hardware connection

Modify network settings of computer

HUB

Laptop

Manuals

DDS Installation Guide

2015.11

Prepare a USB which memory capacity is more than 4GB

Insert USB into USB terminal of DDS

You will see “reading out” and “loading” on monitor ﬁrst.

It will complete in 25 secs.

Take USB out of DDS

Insert USB into computer. There are four folders.

Open “defaultText.txt” in main folder by Notepad.

Edit words for marquee. One sentence for one line.

Insert USB into USB terminal of DDS again.

File system of USB must be FAT32, if not, please format it to FAT32.

main

sub_up sub_down

banner

Diagram

By USB

By Internet

Insert network cable and power into LAN and DC of 「DDS」

(1)

(2)

(3)

(1)

(2)

Connect to 「HUB」

Make sure PC or laptop is connecting with 「HUB」

Use browser Internet Explorer or Google Chrome

(1)

(2)

(3)

Connect to http://192.168.1.159:8080

Enter account and password

Control panel→ network and internet → network and sharing center → modify interface settings

→ Ethernet, select content by clicking right button of mouse

→ select internet communication protocol fourth version (TCP/IPv4)

Set the settings as following. IP: 192.168.1.50; default gateway server: 192.168.1.1

I D admin

PWD admin

Website default

banner

main

defaultText

sub_up

sub_down

Monitor

DDS

ADD http://192.168.1.159:8080

Manuals：http://manual.blueeyes.com.tw