In the following situations may cause condensation:
–
–
When you suddenly move the machine from the freezing place to a warm place.
When you are in the room that just turned on the heating, or the place the air
conditioner and heating would directly sweep through.
–
In the hot summer, you move the machine from an air conditioned room to a hot
and damp place.
The moisture condensation would damage the machine. Imagine that on a hot day
you pour cold drink in the glass, the outer surface of the glass will appear drops.
Similarly, condensation will appear on the cover ,the cover is the most sensitive part
of the machine.
If it appears the condensation, plug the power cord into an electrical outlet, and use
the remote control to turn the switch on, make it operate two to three hours. In this
case, the condensation would evaporate when heating.
About the manual
Please read the instructions carefully before use, our company is not responsible for
the artificial problems caused by incorrect use of the product.
Read and keep instructions properly. Operate according to instructions in the
operation manual.
The pictures on the manual may be different from the pictures on the monitor. This
is because the software version is different.
Service
Do not attempt to repair the machine by yourself.
If not repaired, disassembled or assembled by the professional staff, it may cause
electric shock or damage of the machine.
When the machine has some abnormal phenomenon, this means that the machine
needs to be repaired.
If it needs to change parts, make sure the part has the same features as the original
one. If not, it may cause fire, electric shock, or other damage.
If it has the malfunction below or other malfunction not written, please plug the power
plug, and connect to the agent or the company service center.
–
–
–
–
–
–
Output audio/video is not normal, the light doesn’t shine, emit smoke.
The power cord or plug is damaged
Liquid spilled into the machine or something enters in the body
After the machine get wet because of the rain or water
The machine fall from high place or other reasons to cause damage.
Do as the manual but didn’t work
BlueEyes Technology
5
www.BlueEyestech.com
