Operation manual  
Version 1.5.11.5  
015/12/15  
2
www.BlueEyes.com.tw  
Operation manual  
BlueEyes Matrix  
Thank you for using the product of BlueEyes Technology.  
The manual will introduce the product of BlueEyes Technology. Please read the manual  
before you start using the product.  
Though the information in the manual has been verified before publish, the actual  
specification should be based on the actual shipment. BlueEyes Technology doesn’t  
have to guarantee, proclaim or declare for the content, along with other purpose. In  
addition, the product specification and information that mentioned in the manual is for  
reference only. The content might be update at any time without notice. If there is any  
mistake of the information, including software, firmware, and hardware that mentioned  
in the manual BlueEyes Technology has no responsibility for the mistake.  
Please reach BlueEyes website to get the upgrade of the product specification, our  
company will not notice you. If you want to get the latest product information, operation  
manual, firmware, or you have any question to the products of BlueEyes Technology,  
please contact your local agent or go to the official website of BlueEyes Technology for  
further information.  
It is not allowed to copy/ use the content or to change the information and publishing of  
the manual without BlueEyes Technology’s written consent.  
Copyright 2015 BlueEyes Technology Inc. All Rights Reserved.  
BlueEyes Technology Corp.  
Add: 7F-3, No.200, Sec. 4, Wenxin Rd., North District, Taichung City 40462, Taiwan  
TEL: +886 4 2297 0977 / +886 982 842 977  
Website: www.BlueEyes.tw  
BlueEyes Technology  
1
www.blueeyestech.com  
BlueEyes Technology  
2
www.blueeyestech.com  
1
. Preparation  
Before using Matrix control software, please check hard ware first.  
1
.1 Composition  
Matrix can support up to 6 iCam/iCam PRO. Following is the composition of Matrix.  
For iCam/iCam PRO, please visit:  
http://blueeyes.com.tw/iLearning_iCam.php  
For PT Driver, please visit:  
http://blueeyes.com.tw/iLearning_iCam.php#tabs-8  
1
.2 Compatibility list  
Matrix can support iCam, iCam PRO and PT Driver. Different collocations will result in different  
compatibilities.  
BlueEyes Technology  
3
www.blueeyestech.com  
 
 
 
1
.3 Settings of iCam/ iCam PRO  
Please set stream 2 for iCam/ iCam PRO and leave stream 1 for SES. Because stream 2 is VGA  
and resolution is lower than stream 1. If you need resolution for 1080p when you switch to full  
screen mode. You can set stream 1 for Matrix as well.  
Before using ePTZ function of iCam PRO. Please set resolution 1280*720 for iCam PRO (default  
value is 1920*1080) and select for stream 1 to enable ePTZ.  
BlueEyes Technology  
4
www.blueeyestech.com